- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高相电压小功率测试仪(耐电弧焊接测试仪)-(折算机管理)
High voltage low current tester (arc resistance tester) - (computer control)
产品设备明称:耐电弧试验机
Product name: electric arc resistance tester
產品应用:NDH-A
Product model: NDH - A
充分考虑的标准:GB/T 1411-2002《液体接地涂料耐高压得很低电流值弧光自放电的实验》(就是指IEC 61621-1997)及ASTM D495等规范的的标准设计的手工制造的,并遵循IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
主要的采用範圍及用途:
本试验检测机是,并按照适代替直流电机、电子产品和家庭用的电子产品等职业的安装电工用氟泡沫塑料、硅橡胶胶和绝缘带电阻性电阻电阻漆等绝缘带电阻性电阻电阻产品的耐电孤使用机械性能评选,主代替液体绝缘带电阻性电阻电阻产品如:氟泡沫塑料、薄膜和珍珠棉、硅橡胶、云母片、瓷质、玻璃板、绝缘带电阻性电阻电阻油、绝缘带电阻性电阻电阻漆、硬纸板等媒介的耐电孤使用机械性能软件测试;
本研究所室检测机由换算机把控运转,可能凸显现如今研究所情况下及研究所时间段,研究所完结后并永久保存现如今研究所数据分析,并可直接打印.要求实验设计上报。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 机器为横竖二合一结构特征,底端为运作设计,顶部为现场实验箱。
2 本物料所采用*新智力抑制工艺,按照考虑步骤(IEC或ASTM)可重新使用实验室检测,并在电脑主机上彰显实验工作和最终。
3 **效能较好,抗要素效率强,测试英文gps精度大。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断周期不确定度:需小于 ±10ms
2 调压器体积:2kVA
3 额定功率检测线电压:12.5kV
4 可靠性试验电流值的精密度:±3%
5 电压的控制gps精度:±10% 直流电测定定位精度:1.5%
6 电极材料对岩样有压力:(0.5±0.05)N
7 参比电极建筑材料:钨棒
8 工业时间:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 安全使用生态环境温:(23±2)℃
10 运用生活环境温度:(50±5)%
11 24v电源:220V±5% 50Hz
12 试验台 方式: 新国标/美标/10 mA 反复/20 mA 持续/30 mA间断性/40 mA连续式
13 经过多次实验发现源程序相应:
| 环节段 | 弧光直流电 mA | 电孤通断时光s | 各软件程序段长期的时间s | 实验总耗时s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续不断通 | 60 | 240 | |
| 5 | 20 | 间断通 | 60 | 300 | |
| 6 | 30 | 连续性通 | 60 | 360 | |
| 7 | 40 | 连着通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序号顺序 | 名字大全 | 次数 | 提示 |
| 01 | 耐弧光测验仪 | 这台 | |
| 02 | 工业系统化 | 有一套 | |
| 03 | 工业支承 | 几套 | |
| 04 | 电源适配器电揽 | 一台 | |
| 05 | 接地装置放** | 一瓶 | |
| 06 | 瞬时电流毫安表 | 台 | |
| 07 | pc测控应用 | 一系列 | |
| 08 | 试件材料架 | 一部 | |
| 09 | 电极片多远规格块 | 2块 | |
| 10 | 方向规格块 | 2块 | |
| 11 | 陶瓷厂家片 | 2片 | |
| 12 | 喷墨复印机机 | 1台 | 茶叶品牌 |
| 13 | 计算方法机 | 1台 | 厂家 |
| 14 | 运用说书 | 1份 | |
| 15 | 良好率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 好产品形号:
NDH-A 耐弧光耐压仪-微机掌控
NDH-B 耐电孤试验检测仪-手触屏把控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!